Ion Multi Gauge Controller MG14
Description
The MG14 Multi Gauge Controller is a dual gauge controller. The first channel can support any B-A gauge and any Extractor gauge. The second channel supports any commercially available gauge based on the 0-10V output standard*. As standard, all of Oerlikon-Leybold gauges are supported: ITR 100, ITR 90, DI 200, DI 2000, TTR 211 S, TTR 91, PTR 225. Any others can be implemented as an option. Although just 1U height, the controller is able to display both channels at the same time on the large alphanumeric LCD display. The high brightness blue display provides clear readout from large viewing angles and long distances. A unique feature of the MG13 is the availability of 4 interlocks, each of which can be separately programmed for each channel, including threshold levels and hysteresis. The measurement channels are active immediately upon power-up and ready for emission. Channel 1 is a dedicated channel for B-A gauges. It features very flexible B-A gauge parameter settings and is therefore suitable for use with almost all commercially available third party B-A gauges. The controller is perfectly suited for 2 stage pumps group units, where two ranges (low and high vacuum) need to be controlled.
The unit is also fully software controlled and web-enabled so that it can be operated over any network, including the internet.
Advantages
• Supports one Extractor Gauge
• Measurement range from atmospheric to 2x10-12 mbar
• Controls almost all commercially available Bayard-Alpert gauges
• Degassing of Bayard-Alpert with power and time limit
• Supports Ir/W/Thoria filaments
• Bayard-Alpert overpressure protection
• Selectable measurement units: mbar, Torr, Pascal
• Gas specific correction with one customized setting
• Universal power supply: 90-240VAC, 50-60Hz
• Unit over-temperature protection
• Audible alarm
• Four individually programmable
• Any high and ultra high vacuum systems
• Measurement of ultimate pressure (from atmosphere to UHV range)
• Bakeable and non bakeable systems
Applications
• Any high and ultra high vacuum systems
• Measurement of ultimate pressure (from atmosphere to UHV range)
• Bakeable and non bakeable systems
Technical data
| Measurement chanels | 2 |
| Display range | 2x10-12-2x105mbar |
|
Measurement range: |
|
| Display | LCD 2x16 characters 9,96mm high each line |
| Setpoints ( individual programming for each channel possible ) |
3xNO, 1xNC |
| Suitable Gauges in standard** | DI 200, DI 2000, TTR 211S, TTR91, PTR225, ITR90, ITR100, PTR 90, B-A gauge, MKS Baratron**** |
| Hysteresis | adjustable |
| Supply | 90÷240 VAC |
| Operating temperature | 5-50°C |
| Communication Interface*** (option) | RS232/485/422, USB, EtherNet/IP, Bluetooth |
| Dimensions [mm]: (˝ of 1HE) | 240 x 260 x 44 (W x H x D) |
| Weight, approx | 3,8 kg |
*related to the connected gauge
**any other can be implementedon request
*** Only one comms interface can be used at any one time and is chosen at time of order. However, this may be swapped/interchanged with any other comms interface at any future date via simple rear panel plug and play swap, without having to access the internals of the unit.
**** please refer to manual
Only one communication interface can be chosen at time of order (please refer to table) but this can be easily changed in the future via simple rear panel plugin connection modules, without ever having to access the internals of the unit.